יש לי לוח אם ישן פנטיום 4 עם ארבע חיבורי USB: שניים חיצוניים, ושניים פנימיים בתוך המחשב על הלוח אם.
לפי המפרט הטכני של יצרן לוח האם, יש בלוח הזה רק חיבור אחד של USB2 וכל היתר הם של USB1.1.
עכשיו, לפי lsusb, כך זה נראה:
קוד: |
$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0846:9001 NetGear, Inc. WN111(v2) RangeMax Next Wireless [Atheros AR9170+AR9101]
Bus 001 Device 003: ID 0ea0:2168 Ours Technology, Inc. Transcend JetFlash 2.0 / Astone USB Drive
|
אבל, לפי lsusb -v, שני ההתקנים מקבלים כל אחד חיבור יוסבי 2 (bcdUSB 2.00)
קוד: |
Bus 001 Device 002: ID 0846:9001 NetGear, Inc. WN111(v2) RangeMax Next Wireless [Atheros AR9170+AR9101]
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x0846 NetGear, Inc.
idProduct 0x9001 WN111(v2) RangeMax Next Wireless [Atheros AR9170+AR9101]
Bus 001 Device 003: ID 0ea0:2168 Ours Technology, Inc. Transcend JetFlash 2.0 / Astone USB Drive
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0ea0 Ours Technology, Inc.
idProduct 0x2168 Transcend JetFlash 2.0 / Astone USB Drive
|
נראה ששני ההתקנים מקבלים רוחב פס של USB2 "בו זמנית", למרות שהם בעצם יושבים על חיבורים נפרדים.
כנראה הם מחלקים בינהם לסרוגין את רוחב הפס המהיר יותר.
וה-USB1.1 נשאר יתום