ווטסאפ - לינוקס, BSD, קוד פתוח ותוכנה חופשית בעברית. Whatsup - Linux, BSD, open source and free software in Hebrew

 
 
  כניסת חברים · רישום · שכחתי סיסמה  
tux the penguin
תגובה לנושא
צפיה בנושא הבא Printable version התחבר כדי לבדוק הודעות פרטיות צפיה בנושא הקודם
PsychoDadלא בפורום כעת ת.הצטרפות: 18/01/2004 · הודעות: 341 · מיקום: אי שם בגליל...
 

הודעה פורסם: 10/07/2004 - 18:18
נושא ההודעה: לא מוצא קובץ הגדרות של dosbox....

התקנתי היום את dosbox בג'נטו אבל אני לא מוצא את התיקיה של התוכנה או לפחות את הקובץ הגדרות...

מישה יודע איפה הוא?
 
 צפיה בפרופיל המשתמש שלח הודעה פרטית ביקור באתר המפרסם מספר ICQ 
תגובה  עם ציטוט חזרה למעלה
חזרה לתוכן הדיון
אורח · ·
 

הודעה פורסם: 10/07/2004 - 18:48
נושא ההודעה:

/usr/games/bin/dosbox
or somthing like that
 
   
תגובה  עם ציטוט חזרה למעלה
חזרה לתוכן הדיון
PsychoDadלא בפורום כעת ת.הצטרפות: 18/01/2004 · הודעות: 341 · מיקום: אי שם בגליל...
 

הודעה פורסם: 10/07/2004 - 19:58
נושא ההודעה:

שם הקובץ הבינארי של התוכנה...אני מחפש את הקובץ הגדרות...
 
 צפיה בפרופיל המשתמש שלח הודעה פרטית ביקור באתר המפרסם מספר ICQ 
תגובה  עם ציטוט חזרה למעלה
חזרה לתוכן הדיון
אייל ת.הצטרפות: 24/04/2003 · הודעות: 3203 ·
 

הודעה פורסם: 10/07/2004 - 20:58
נושא ההודעה:

כן כן, אגב אין צורך בלחפש את הקובץ הביארי,
מספיק להכניס את עצמך לקבוצה games, ואז זה פשוט יעבוד כפקודה.

בקשר להגדרות, אז זהו שלא קיים קובץ הגדרות ברירת מחדל נדמה לי,
או שצריך ליצור אותו במיקום ברירת המחדל , זה כבר רשום בREADME..
 
 צפיה בפרופיל המשתמש שלח הודעה פרטית MSN Messenger  
תגובה  עם ציטוט חזרה למעלה
חזרה לתוכן הדיון
PsychoDadלא בפורום כעת ת.הצטרפות: 18/01/2004 · הודעות: 341 · מיקום: אי שם בגליל...
 

הודעה פורסם: 10/07/2004 - 21:17
נושא ההודעה:

לפי הפורומים שלהם אמור להיות קובץ בשם dosbox.conf אבל הם רק מדברים שם על וינדוס ולא אומרים איפה הוא בלינוקס , ואותו אני מחפש...
 
 צפיה בפרופיל המשתמש שלח הודעה פרטית ביקור באתר המפרסם מספר ICQ 
תגובה  עם ציטוט חזרה למעלה
חזרה לתוכן הדיון
DecayCellלא בפורום כעת ת.הצטרפות: 28/04/2004 · הודעות: 400 · מיקום: נס-ציונה, ישראל
 

הודעה פורסם: 10/07/2004 - 21:33
נושא ההודעה:

הנה קובץ ההגדרות שלי (אתה צריך לשמור אותו ב-dosboxrc./~):
קוד:
[sdl]
# fullscreen -- Start dosbox directly in fullscreen.
# fulldouble -- Use double buffering in fullscreen.
# fullfixed -- Don't resize the screen when in fullscreen.
# fullwidth/height -- What resolution to use for fullscreen, use together with fullfixed.
# output -- What to use for output: surface,overlay,opengl,openglnb.
# hwscale -- Extra scaling of window if the output device supports hardware scaling.
# autolock -- Mouse will automatically lock, if you click on the screen.
# sensitiviy -- Mouse sensitivity.
# waitonerror -- Wait before closing the console if dosbox has an error.

fullscreen=false
fulldouble=false
fullfixed=false
fullwidth=0
fullheight=0
output=surface
hwscale=1.00
autolock=true
sensitivity=100
waitonerror=true

[dosbox]
# language -- Select another language file.
# memsize -- Amount of memory dosbox has in megabytes.
# machine -- The type of machine tries to emulate:auto,hercules,cga,tandy,vga.
#            Try a specific type if your game has problems with auto.

language=
machine=auto
memsize=16

[render]
# frameskip -- How many frames dosbox skips before drawing one.
# snapdir -- Directory where screenshots get saved.
# aspect -- Do aspect correction.
# scaler -- Scaler used to enlarge/enhance low resolution modes.
#           Supported are none,normal2x,advmame2x

frameskip=0
snapdir=snaps
aspect=false
scaler=normal2x

[cpu]
# core -- CPU Core used in emulation: normal,full,dynamic.
# cycles -- Amount of instructions dosbox tries to emulate each millisecond.
#           Setting this higher than your machine can handle is bad!
# cycleup   -- Amount of cycles to increase/decrease with keycombo.
# cycledown    Setting it lower than 100 will be a percentage.

core=normal
cycles=2500
cycleup=500
cycledown=20

[mixer]
# nosound -- Enable silent mode, sound is still emulated though.
# rate -- Mixer sample rate, setting any devices higher than this will
#         probably lower their sound quality.
# blocksize -- Mixer block size, larger blocks might help sound stuttering
#              but sound will also be more lagged.
# wavedir -- Directory where saved sound output goes when you use the
#            sound record key-combination, check README file.

nosound=false
rate=22050
blocksize=2048
wavedir=waves

[midi]
# mpu401 -- Enable MPU-401 Emulation.
# device -- Device that will receive the MIDI data from MPU-401.
#           This can be default,alsa,oss,win32,coreaudio,none.
# config -- Special configuration options for the device.

mpu401=true
device=alsa
config=128:0

[sblaster]
# sblaster -- Enable the soundblaster emulation.
# base,irq,dma -- The IO/IRQ/DMA address of the soundblaster.
# sbrate -- Sample rate of soundblaster emulation.
# adlib -- Enable the adlib emulation.
# adlibrate -- Sample rate of adlib emulation.
# cms -- Enable the Creative Music System/Gameblaster emulation.
#        Enabling both the adlib and cms might give conflicts!
# cmsrate -- Sample rate of cms emulation.

sblaster=true
base=220
irq=7
dma=1
sbrate=22050
adlib=true
adlibrate=22050
adlibmode=adlib
cms=false
cmsrate=22050

[gus]
# gus -- Enable the Gravis Ultrasound emulation.
# base,irq1,irq2,dma1,dma2 -- The IO/IRQ/DMA addresses of the
#            Gravis Ultrasound. (Same IRQ's and DMA's are OK.)
# rate -- Sample rate of Ultrasound emulation.
# ultradir -- Path to Ultrasound directory.  In this directory
#             there should be a MIDI directory that contains
#             the patch files for GUS playback.  Patch sets used
#             with Timidity should work fine.

gus=true
rate=22050
base=240
irq1=5
irq2=5
dma1=3
dma2=3
ultradir=C:\ULTRASND

[speaker]
# pcspeaker -- Enable PC-Speaker emulation.
# pcrate -- Sample rate of the PC-Speaker sound generation.
# tandy -- Enable Tandy 3-Voice emulation.
# tandyrate -- Sample rate of the Tandy 3-Voice generation.
# disney -- Enable Disney Sound Source emulation.

pcspeaker=true
pcrate=22050
tandy=true
tandyrate=22050
disney=true

[bios]
# Nothing to setup yet!


[dos]
# xms -- Enable XMS support.
# ems -- Enable EMS support.

xms=true
ems=true

[modem]
# modem -- Enable virtual modem emulation.
# comport -- COM Port modem is connected to.
# listenport -- TCP Port the momdem listens on for incoming connections.

modem=true
comport=2
listenport=23

[autoexec]
# Lines in this section will be run at startup.




אולי תצטרך לשנות שם משהו בהגדרות, אבל אצלי זה פועל באופן מושלם.
בהצלחה! Smile
 
 צפיה בפרופיל המשתמש שלח הודעה פרטית ביקור באתר המפרסם מספר ICQ 
תגובה  עם ציטוט חזרה למעלה
חזרה לתוכן הדיון
הצגת הודעות מלפני:     
מעבר אל:  
כל הזמנים הם GMT + 2 שעות
תגובה לנושא
צפיה בנושא הבא Printable version התחבר כדי לבדוק הודעות פרטיות צפיה בנושא הקודם
PNphpBB2 © 2003-2004 

תוכן הדיון

  1. PsychoDad
  2. אורח
  3. PsychoDad
  4. אייל
  5. PsychoDad
  6. DecayCell