ווטסאפ - לינוקס, BSD, קוד פתוח ותוכנה חופשית בעברית. Whatsup - Linux, BSD, open source and free software in Hebrew

 
 
  כניסת חברים · רישום · שכחתי סיסמה  
tux the penguin
נושא זה נעול . לא ניתן לערוך הודעות או להגיב
צפיה בנושא הבא Printable version התחבר כדי לבדוק הודעות פרטיות צפיה בנושא הקודם
taxi4uלא בפורום כעת ת.הצטרפות: 19/01/2006 · הודעות: 23 ·
 

הודעה פורסם: 07/10/2006 - 22:13
5 נושא ההודעה: MULTI USER SEATS IN EHAD 2006

אני משתמש בהפצת אחד 2006 של דוביקס ואני מאד מאד מאד מאד מרוצה
בדר"כ הכל עובד חלק
בעבר השתמשתי בגרסת ה2006 הרגילה והיו שם הרבה בעיות
אך גרסת הקלסיק 2006 היא לדידי הגרסה הכי ידידותית וקלה להבנה ולהפעלה

ומאחר ויש לי צורך בשימוש ביותר מעמדה אחת התקנתי במחשב 2 כרטיסי מסך נוספים לכרטיס מסך \
שעל הלוח שגם הוא עם שתי יציאות VGA +DVI

יצרתי לי שלושה יוזרים כל אחד עם סיסמא
ופתחתי את המדריך המפורט של bob smith
Build a Six-headed, Six-user Linux System


להלן סדר הפעולות שנקטתי

1וידאתי קודם כל שאחד 2006 זיהה את שלשת כרטיסי המסך שהתקנתי
ובבדיקה במרכז הבקרה > חומרה אכן מופיעים שם כרטיס המסך שעל הלוח מסוג SIS 651 \
DUAL HEADS
ןשני כרטיסי מסך נוספים מסוג ATI RAGE128
כמו כן התקנתי 3 עכברים ושלושה מקלדות
עכבר ומקלדת ראשיים דרך PS/2
והשאר דרך יציאות USB שונות בעזרת USB TO PS/2 ADAPTER

על מנת למצוא איפה כולם מותקנים הרצתי פקודת lspci | grep VGA
וקבלתי את המיקומים הבאים לגבי כרטיסי המסך :
lspci | grep VGA
00:0e.0 VGA compatible controller: ATI Technologies Inc Rage 128 RK/VR
00:13.0 VGA compatible controller: ATI Technologies Inc Rage 128 RK/VR
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA Display Adapter


לפי מיטב הבנתי כרטיס המסך הראשי שהינו SIS הותקן ב 01:00.0
כרטיס מס 1 ATI RAGE 128 מותקן ב 00:13.0
וכרטיס מס 2 ATI RAGE 128 מותקן ב 00:14.0 אם אני מתרגם נכון את e

שמרתי את הפלט הבא והמשכתי לשלב הבא
שלב העכברים הרצתי פקודה
ls /dev/input/mouse*
/dev/input/mouse0 /dev/input/mouse1 /dev/input/mouse2
למעשה הבנתי שכאן הסדר לא כל כך משנה
אבל בכל זאת שמרתי את הפלט
עכבר ps/2 נמצא בכניסה 0
עכבר usb ראשון בכניסה 1
עכבר usb שני בכניסה 2

המשכתי הלאה למקלדות בהרצת פקודה
more /proc/bus/input/devices
וקיבלתי את הפלט הבא

I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
H: Handlers=kbd event0
B: EV=120013
B: KEY=4 2000000 2b803878 f840d001 f2ffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7

I: Bus=0011 Vendor=0002 Product=0005 Version=0000
N: Name="ImPS/2 Logitech Wheel Mouse"
P: Phys=isa0060/serio1/input0
H: Handlers=mouse0 event1 ts0
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103

I: Bus=0003 Vendor=04d9 Product=1400 Version=0142
N: Name="USB HIDBP Keyboard 04d9:1400"
P: Phys=usb-0000:00:03.1-1/input0
H: Handlers=kbd event2
B: EV=120003
B: KEY=7 ff87207a c14057ff febeffdf ffefffff ffffffff fffffffe
B: LED=1f

I: Bus=0003 Vendor=04d9 Product=1400 Version=0142
N: Name="USB HIDBP Keyboard 04d9:1400"
P: Phys=usb-0000:00:03.0-1/input0
H: Handlers=kbd event3
B: EV=120003
B: KEY=7 ff87207a c14057ff febeffdf ffefffff ffffffff fffffffe
B: LED=1f

I: Bus=0003 Vendor=04d9 Product=1400 Version=0142
N: Name="04d9:1400"
P: Phys=usb-0000:00:03.1-1/input1
H: Handlers=kbd mouse1 event4 ts1
B: EV=7
B: KEY=1f0007 0 0 39fa d801d101 1e0000 0 0 0
B: REL=103

I: Bus=0003 Vendor=04d9 Product=1400 Version=0142
N: Name="04d9:1400"
P: Phys=usb-0000:00:03.0-1/input1
H: Handlers=kbd mouse2 event5 ts2
B: EV=7
B: KEY=1f0007 0 0 39fa d801d101 1e0000 0 0 0
B: REL=103

[a1@login ~]$

על מנת ל עשות קצת סדר הכנתי טבלה כזאת

bus seat vga card keboard mouse

11 0 01:00.0 EVENT 0 0

03 1 00:13.0 EVENT 2 1

03 2 00:0e.0 EVENT 3 2


אני מקווה שהבנתי נכון את הפלט

אסביר את עצמי ותקנו אותי אם לא הבנתי נכון

אני הבנתי שיש לערוך את ה xorg.conf לפי הפרמטרים הבאים
עמדה ראשונה מוגדרת על פי הנתונים הבאים
seat or server layout 0 runs on the main SIS CARD at 01:00.0 address along with the keyboard of EVENT 0 & MOUSE 0

עמדה שניה
SEAT OR SERVER LAYOUT 1 runs on one of the twoi ATI VGA CARDS at 00:13.0 address
along with the keyboard of EVENT 2 & MOUSE 1

עמדה שלישית
SEAT OR SERVER LAYOUT 2 runs on the 2nd ATI VGA CARD at 00:0e address
along with the keyboard of EVENT 3 & MOUSE 2

אני מקווה שעד לכאן הבנתי נכון

אני מצרף בנקודה זאת העתק של ה XORG.CONF לפני שאני ניגש לערוך אותו


File generated by XFdrake.

# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************

Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection

Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
AllowMouseOpenFail # allows the server to start up even if the mouse does not work
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection

Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
EndSection

Section "InputDevice"
Identifier "Keyboard1"
Driver "keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,il"
Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
EndSection

Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "6 7"
EndSection

Section "Monitor"
Identifier "monitor1"
VendorName "Generic"
ModelName "1024x768 @ 60 Hz"
HorizSync 31.5-48.5
VertRefresh 50-70

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Monitor"
Identifier "monitor2"
VendorName "Generic"
ModelName "Flat Panel 1024x768"
HorizSync 31.5-55
VertRefresh 40-70

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Monitor"
Identifier "monitor3"
VendorName "Generic"
ModelName "1024x768 @ 70 Hz"
HorizSync 31.5-57.0
VertRefresh 50-70

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Device"
Identifier "device1"
BoardName "SiS 650"
Driver "sis"
Screen 0
Option "DPMS"
EndSection

Section "Device"
Identifier "device2"
VendorName "ATI"
BoardName "ATI Rage 128"
Driver "ati"
Screen 0
BusID "PCI:0:19:0"
Option "DPMS"
EndSection

Section "Device"
Identifier "device3"
VendorName "Silicon Integrated System"
BoardName "SiS 650"
Driver "sis"
Screen 0
BusID "PCI:1:0:0"
Option "DPMS"
EndSection

Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Virtual 1024 768
EndSubsection

Subsection "Display"
Depth 15
Virtual 1024 768
EndSubsection

Subsection "Display"
Depth 16
Virtual 1024 768
EndSubsection

Subsection "Display"
Depth 24
Virtual 1024 768
EndSubsection
EndSection

Section "Screen"
Identifier "screen2"
Device "device2"
Monitor "monitor2"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Virtual 1024 768
EndSubsection

Subsection "Display"
Depth 15
Virtual 1024 768
EndSubsection

Subsection "Display"
Depth 16
Virtual 1024 768
EndSubsection

Subsection "Display"
Depth 24
Virtual 1024 768
EndSubsection
EndSection

Section "Screen"
Identifier "screen3"
Device "device3"
Monitor "monitor3"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Virtual 1024 768
EndSubsection

Subsection "Display"
Depth 15
Virtual 1024 768
EndSubsection

Subsection "Display"
Depth 16
Virtual 1024 768
EndSubsection

Subsection "Display"
Depth 24
Virtual 1024 768
EndSubsection
EndSection

Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1"

# Screen "screen2" RightOf "screen1"
# Screen "screen3" RightOf "screen2"
#Option "Xinerama"
EndSection


אני ניגש עכשיו לערוך את ה xorg.conf

ואצרף אותו כאן לאחר העריכה ואבקש התייחסותכם אם עשיתי את הדברים נכון או לא

דרך אגב אני מקבל כאן איזהשהי הודעת שגיאה
(gedit:4007): Pango-WARNING **: Error loading GPOS table 4097
מייד לאחר שאני מבקש לערוך את ה
xorg.conf

הנה הxorg.conf החחדש אחרי שערכתי אותו אני מאד מקווה שערכתי אותו נכון

לבדיקה אני מריץ פקודת
sort /etc/X11/xorg.conf | uniq

והתוצאה
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
H: Handlers=kbd event0
B: EV=120013
B: KEY=4 2000000 2b803878 f840d001 f2ffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7

I: Bus=0011 Vendor=0002 Product=0005 Version=0000
N: Name="ImPS/2 Logitech Wheel Mouse"
P: Phys=isa0060/serio1/input0
H: Handlers=mouse0 event1 ts0
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103

I: Bus=0003 Vendor=04d9 Product=1400 Version=0142
N: Name="USB HIDBP Keyboard 04d9:1400"
P: Phys=usb-0000:00:03.1-1/input0
H: Handlers=kbd event2
B: EV=120003
B: KEY=7 ff87207a c14057ff febeffdf ffefffff ffffffff fffffffe
B: LED=1f

I: Bus=0003 Vendor=04d9 Product=1400 Version=0142
N: Name="USB HIDBP Keyboard 04d9:1400"
P: Phys=usb-0000:00:03.0-1/input0
H: Handlers=kbd event3
B: EV=120003
B: KEY=7 ff87207a c14057ff febeffdf ffefffff ffffffff fffffffe
B: LED=1f

I: Bus=0003 Vendor=04d9 Product=1400 Version=0142
N: Name="04d9:1400"
P: Phys=usb-0000:00:03.1-1/input1
H: Handlers=kbd mouse1 event4 ts1
B: EV=7
B: KEY=1f0007 0 0 39fa d801d101 1e0000 0 0 0
B: REL=103

I: Bus=0003 Vendor=04d9 Product=1400 Version=0142
N: Name="04d9:1400"
P: Phys=usb-0000:00:03.0-1/input1
H: Handlers=kbd mouse2 event5 ts2
B: EV=7
B: KEY=1f0007 0 0 39fa d801d101 1e0000 0 0 0
B: REL=103

[a1@login ~]$ /etc/X11/
bash: /etc/X11/: is a directory
[a1@login ~]$ /etc/X11
bash: /etc/X11: is a directory
[a1@login ~]$ cd /etc/X11/
[a1@login X11]$ gedit xor
xorg.conf xorg.conf~ xorg.conf.old xorg.conf.one
[a1@login X11]$ gedit xorg.conf

(gedit:4007): Pango-WARNING **: Error loading GPOS table 4097
[a1@login X11]$ cd..
[a1@login etc]$ cd..
[a1@login /]$ sort /etc/X11/xorg.conf | uniq



# **********************************************************************
# 768x576 @ 100 Hz, 61.6 kHz hsync
# 768x576 @ 79 Hz, 50 kHz hsync
AllowMouseOpenFail # allows the server to start up even if the mouse does not work
BoardName "ATI Rage 128"
BoardName "SiS 650"
BusID "PCI:0:0e:0"
BusID "PCI:0:13:0"
BusID "PCI:1:0:0"
# By default, Mandrake 6.0 and later now use a font server independent of
DefaultColorDepth 24
Depth 15
Depth 16
Depth 24
Depth 8
Device "device0"
Device "device1"
Device "device2"
#DontZap # disable <Crtl><Alt><BS> (server abort)
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
Driver "ati"
Driver "evdev"
Driver "mouse"
Driver "sis"
EndSection
EndSubsection
# File generated by XFdrake.
FontPath "unix/:-1"
HorizSync 31.5-48.5
HorizSync 31.5-55
HorizSync 31.5-57.0
Identifier "device0"
Identifier "device1"
Identifier "device2"
Identifier "Keyboard0"
Identifier "Keyboard1"
Identifier "Keyboard2"
Identifier "monitor0"
Identifier "monitor1"
Identifier "monitor2"
Identifier "Mouse0"
Identifier "Mouse1"
Identifier "Mouse2"
Identifier "screen0"
Identifier "screen1"
Identifier "screen2"
Identifier "seat0"
Identifier "seat1"
Identifier "seat2"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Keyboard2" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
InputDevice "Mouse1" "CorePointer"
InputDevice "Mouse2" "CorePointer"
Load "dbe" # Double-Buffering Extension
Load "extmod"
Load "freetype"
Load "glx" # 3D layer
Load "type1"
Load "v4l" # Video for Linux
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
ModelName "1024x768 @ 60 Hz"
ModelName "1024x768 @ 70 Hz"
ModelName "Flat Panel 1024x768"
Monitor "monitor0"
Monitor "monitor1"
Monitor "monitor2"
# Multiple FontPath entries are allowed (they are concatenated together)
Option "Device" "/dev/input/event0"
Option "Device" "/dev/input/event2"
Option "Device" "/dev/input/event3"
Option "Device" "/dev/mouse0"
Option "Device" "/dev/mouse1"
Option "Device" "/dev/mouse2"
Option "DPMS"
Option "Protocol" "ExplorerPS/2"
Option "XkbLayout" "us,il"
Option "XkbModel" "pc105"
Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
Option "ZAxisMapping" "6 7"
# Refer to the XF86Config man page for details about the format of
Screen 0
Screen 0 "screen0" 0 0
Screen 0 "screen1" 0 0
Screen 0 "screen2" 0 0
Screen 1
Screen 2
# seat 0
# seat 1
# seat 2
Section "Device"
Section "Files"
Section "InputDevice"
Section "Module"
Section "Monitor"
Section "Screen"
Section "ServerFlags"
Section "ServerLayout"
Subsection "Display"
# the X server to render fonts.
# this file.
# TV fullscreen mode or DVD fullscreen output.
VendorName "ATI"
VendorName "Generic"
VendorName "Silicon Integrated System"
VertRefresh 40-70
VertRefresh 50-70
Virtual 1024 768
[a1@login /]$

נראה הגיוני ונכון אמנם רק לפי מיטב הבנתי
אני ממשיך הלאה לבדיקה נוספת

sort /etc/X11/xorg.conf | uniq -d
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
H: Handlers=kbd event0
B: EV=120013
B: KEY=4 2000000 2b803878 f840d001 f2ffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7

I: Bus=0011 Vendor=0002 Product=0005 Version=0000
N: Name="ImPS/2 Logitech Wheel Mouse"
P: Phys=isa0060/serio1/input0
H: Handlers=mouse0 event1 ts0
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103

I: Bus=0003 Vendor=04d9 Product=1400 Version=0142
N: Name="USB HIDBP Keyboard 04d9:1400"
P: Phys=usb-0000:00:03.1-1/input0
H: Handlers=kbd event2
B: EV=120003
B: KEY=7 ff87207a c14057ff febeffdf ffefffff ffffffff fffffffe
B: LED=1f

I: Bus=0003 Vendor=04d9 Product=1400 Version=0142
N: Name="USB HIDBP Keyboard 04d9:1400"
P: Phys=usb-0000:00:03.0-1/input0
H: Handlers=kbd event3
B: EV=120003
B: KEY=7 ff87207a c14057ff febeffdf ffefffff ffffffff fffffffe
B: LED=1f

I: Bus=0003 Vendor=04d9 Product=1400 Version=0142
N: Name="04d9:1400"
P: Phys=usb-0000:00:03.1-1/input1
H: Handlers=kbd mouse1 event4 ts1
B: EV=7
B: KEY=1f0007 0 0 39fa d801d101 1e0000 0 0 0
B: REL=103

I: Bus=0003 Vendor=04d9 Product=1400 Version=0142
N: Name="04d9:1400"
P: Phys=usb-0000:00:03.0-1/input1
H: Handlers=kbd mouse2 event5 ts2
B: EV=7
B: KEY=1f0007 0 0 39fa d801d101 1e0000 0 0 0
B: REL=103

[a1@login ~]$ /etc/X11/
bash: /etc/X11/: is a directory
[a1@login ~]$ /etc/X11
bash: /etc/X11: is a directory
[a1@login ~]$ cd /etc/X11/
[a1@login X11]$ gedit xor
xorg.conf xorg.conf~ xorg.conf.old xorg.conf.one
[a1@login X11]$ gedit xorg.conf

(gedit:4007): Pango-WARNING **: Error loading GPOS table 4097
[a1@login X11]$ cd..
[a1@login etc]$ cd..
[a1@login /]$ sort /etc/X11/xorg.conf | uniq



# **********************************************************************
# 768x576 @ 100 Hz, 61.6 kHz hsync
# 768x576 @ 79 Hz, 50 kHz hsync
AllowMouseOpenFail # allows the server to start up even if the mouse does not work
BoardName "ATI Rage 128"
BoardName "SiS 650"
BusID "PCI:0:0e:0"
BusID "PCI:0:13:0"
BusID "PCI:1:0:0"
# By default, Mandrake 6.0 and later now use a font server independent of
DefaultColorDepth 24
Depth 15
Depth 16
Depth 24
Depth 8
Device "device0"
Device "device1"
Device "device2"
#DontZap # disable <Crtl><Alt><BS> (server abort)
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
Driver "ati"
Driver "evdev"
Driver "mouse"
Driver "sis"
EndSection
EndSubsection
# File generated by XFdrake.
FontPath "unix/:-1"
HorizSync 31.5-48.5
HorizSync 31.5-55
HorizSync 31.5-57.0
Identifier "device0"
Identifier "device1"
Identifier "device2"
Identifier "Keyboard0"
Identifier "Keyboard1"
Identifier "Keyboard2"
Identifier "monitor0"
Identifier "monitor1"
Identifier "monitor2"
Identifier "Mouse0"
Identifier "Mouse1"
Identifier "Mouse2"
Identifier "screen0"
Identifier "screen1"
Identifier "screen2"
Identifier "seat0"
Identifier "seat1"
Identifier "seat2"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Keyboard2" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
InputDevice "Mouse1" "CorePointer"
InputDevice "Mouse2" "CorePointer"
Load "dbe" # Double-Buffering Extension
Load "extmod"
Load "freetype"
Load "glx" # 3D layer
Load "type1"
Load "v4l" # Video for Linux
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
ModelName "1024x768 @ 60 Hz"
ModelName "1024x768 @ 70 Hz"
ModelName "Flat Panel 1024x768"
Monitor "monitor0"
Monitor "monitor1"
Monitor "monitor2"
# Multiple FontPath entries are allowed (they are concatenated together)
Option "Device" "/dev/input/event0"
Option "Device" "/dev/input/event2"
Option "Device" "/dev/input/event3"
Option "Device" "/dev/mouse0"
Option "Device" "/dev/mouse1"
Option "Device" "/dev/mouse2"
Option "DPMS"
Option "Protocol" "ExplorerPS/2"
Option "XkbLayout" "us,il"
Option "XkbModel" "pc105"
Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
Option "ZAxisMapping" "6 7"
# Refer to the XF86Config man page for details about the format of
Screen 0
Screen 0 "screen0" 0 0
Screen 0 "screen1" 0 0
Screen 0 "screen2" 0 0
Screen 1
Screen 2
# seat 0
# seat 1
# seat 2
Section "Device"
Section "Files"
Section "InputDevice"
Section "Module"
Section "Monitor"
Section "Screen"
Section "ServerFlags"
Section "ServerLayout"
Subsection "Display"
# the X server to render fonts.
# this file.
# TV fullscreen mode or DVD fullscreen output.
VendorName "ATI"
VendorName "Generic"
VendorName "Silicon Integrated System"
VertRefresh 40-70
VertRefresh 50-70
Virtual 1024 768
[a1@login /]$ 'sort.xorg.conf|uniq -d'
bash: sort.xorg.conf|uniq -d: command not found
[a1@login /]$ sort /
.autofsck boot/ etc/ initrd/ lost+found/ opt/ root/ sys/ usr/
bin/ dev/ home/ lib/ mnt/ proc/ sbin/ tmp/ var/
[a1@login /]$ sort /etc/X11/xor
xorg.conf xorg.conf~ xorg.conf.old xorg.conf.one
[a1@login /]$ sort /etc/X11/xorg.conf | u
ucs2any unicode_start update-menus usb_id_test
udevinfo unicode_stop update-mime-database userdrake
ul uniq uptime userinfo
ulimit unix-lpr.sh urpmf usermount
umask unlink urpmf.real userpasswd
umount unprotoize urpm-generic users
umountloop unset urpmi2smart.py usleep
unalias until urpmi_rpm-find-leaves utmpdump
uname unzip urpmi_rpm-find-leaves.real uuidgen
unexpand unzipsfx urpmq
unflatten update-desktop-database urpmq.real
[a1@login /]$ sort /etc/X11/xorg.conf | un
unalias unexpand unicode_start uniq unlink unset unzip
uname unflatten unicode_stop unix-lpr.sh unprotoize until unzipsfx
[a1@login /]$ sort /etc/X11/xorg.conf | uni
unicode_start unicode_stop uniq unix-lpr.sh
[a1@login /]$ sort /etc/X11/xorg.conf | uniq -d


# **********************************************************************
# 768x576 @ 100 Hz, 61.6 kHz hsync
# 768x576 @ 79 Hz, 50 kHz hsync
BoardName "ATI Rage 128"
DefaultColorDepth 24
Depth 15
Depth 16
Depth 24
Depth 8
Driver "ati"
Driver "evdev"
Driver "mouse"
EndSection
EndSubsection
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
Option "DPMS"
Option "Protocol" "ExplorerPS/2"
Option "XkbLayout" "us,il"
Option "XkbModel" "pc105"
Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
Option "ZAxisMapping" "6 7"
Section "Device"
Section "InputDevice"
Section "Monitor"
Section "Screen"
Section "ServerLayout"
Subsection "Display"
# TV fullscreen mode or DVD fullscreen output.
VendorName "ATI"
VendorName "Generic"
VertRefresh 50-70
Virtual 1024 768
[a1@login /]$

נראה טוב ממשיך הלאה

[servers]
# These are the standard servers. You can add as many you want here
# and they will always be started. Each line must start with a unique
# number and that will be the display number of that server. Usually just
# the 0 server is used.
0=Standard
1=Standard
2=Standard

#1=Standard
# Note the VTAllocation and FirstVT keys on linux and freebsd.
# Don't add any vt<number> arguments if VTAllocation is on, and set FirstVT to
# be the first vt available that your gettys don't grab (gettys are usually
# dumb and grab even a vt that has already been taken). Using 7 will work
# pretty much for all linux distributions. VTAllocation is not currently
# implemented on anything but linux and freebsd. Feel free to send patches.
# X servers will just not get any extra arguments then.
#
# If you want to run an X terminal you could add an X server such as this
#0=Terminal -query serverhostname
# or for a chooser (optionally serverhostname could be localhost)
#0=Terminal -indirect serverhostname
#
# If you wish to run the XDMCP chooser on the local display use the following
# line
#0=Chooser

## Note:
# is your X server not listening to TCP requests? Perhaps you should look
# at the security/DisallowTCP setting!

# Definition of the standard X server.
[server-Standard0]
name=Standard server
command=/usr/X11R6/bin/X -nolisten tcp -novtswitch -sharevts -layout seat0
flexible=true
[server-Standard1]
name=Standard server
command=/usr/X11R6/bin/X -nolisten tcp -novtswitch -sharevts -layout seat1
flexible=true
[server-Standard2]
name=Standard server
command=/usr/X11R6/bin/X -nolisten tcp -novtswitch -sharevts -layout seat2
flexible=true

נקווה לטוב
 
 צפיה בפרופיל המשתמש שלח הודעה פרטית ביקור באתר המפרסם MSN Messenger  
תגובה  עם ציטוט חזרה למעלה
חזרה לתוכן הדיון
taxi4uלא בפורום כעת ת.הצטרפות: 19/01/2006 · הודעות: 23 ·
 

הודעה פורסם: 08/10/2006 - 01:14
13 נושא ההודעה: 3 problems to solve bad file descriptor

אחרי שערכתי את ה xorg.conf
ואתחלתי את המחשב אני מקבל את ההודעות הבאות

PRASE ERROR ON LINE 248 OF SECTION SCREEN IN FILE XORG.CONF
SUBSECTION IS NO VALID KEYWORD IN THIS SECTION
(EE) PROBLEM PARSING THE CONFIG FILE

FATAL ERROR SERVER
NO SCREENS FOUND

WW XF86loseconsole VT GETSTATE Failed Bad File Descriptor
WW XF86 loseconsole KDSETMODE Failed Bad File Descriptor
VT GETMODE Failed
Bad File Descriptor

ניסיתי לשנות ולתקן את השורה אך ללא הצלחה אולי מישהו יכול לעזור
מה שאני בכל זאת יכול לעשות אני פשוט שמרתי את קובץ הxorg.conf האורגינלי ואני מחזיר אותו כדי להמשיך להשתמש במחשב כאילו עם כרטיס אחד עובד
עוד דבר חשוב
אני יכול להגדיר עם איזה כרטיס מסך אני רוצה לעבוד
ובדקתי את זה יש לי אפשרות לעבוד גם עם הכרטיס שעל הלוח sis 651
וגם עם הכרטיס ATI RAGE 128
אבל לא ביחד
אני מרגיש שאני ממש קרוב לפתרון אך חייב איזהשהי עזרה מצדכם

תודה מראש
 
 צפיה בפרופיל המשתמש שלח הודעה פרטית ביקור באתר המפרסם MSN Messenger  
תגובה  עם ציטוט חזרה למעלה
חזרה לתוכן הדיון
DoK לא מחובראורח · ·
 

הודעה פורסם: 08/10/2006 - 02:00
נושא ההודעה:

צרף בבקשה את קובץ ה-xorg.conf המלא מיושר לשמאל (השתמש בתגית code)
 
   
תגובה  עם ציטוט חזרה למעלה
חזרה לתוכן הדיון
taxi4uלא בפורום כעת ת.הצטרפות: 19/01/2006 · הודעות: 23 ·
 

הודעה פורסם: 08/10/2006 - 05:19
נושא ההודעה:

קוד:

[a1@login ~]$ lspci | grep VGA
00:0e.0 VGA compatible controller: ATI Technologies I
00:13.0 VGA compatible controller: ATI Technologies I
01:00.0 VGA compatible controller: Silicon Integrated                              PCI/AGP VGA Display Adapter
 
 צפיה בפרופיל המשתמש שלח הודעה פרטית ביקור באתר המפרסם MSN Messenger  
תגובה  עם ציטוט חזרה למעלה
חזרה לתוכן הדיון
אורח · ·
 

הודעה פורסם: 08/10/2006 - 07:06
נושא ההודעה:

taxi4u :
קוד:

[a1@login ~]$ lspci | grep VGA
00:0e.0 VGA compatible controller: ATI Technologies I
00:13.0 VGA compatible controller: ATI Technologies I
01:00.0 VGA compatible controller: Silicon Integrated                              PCI/AGP VGA Display Adapter

Dok ביקש את ה xorg.conf
 
   
תגובה  עם ציטוט חזרה למעלה
חזרה לתוכן הדיון
הצגת הודעות מלפני:     
מעבר אל:  
כל הזמנים הם GMT + 2 שעות
נושא זה נעול . לא ניתן לערוך הודעות או להגיב
צפיה בנושא הבא Printable version התחבר כדי לבדוק הודעות פרטיות צפיה בנושא הקודם
PNphpBB2 © 2003-2004 

תוכן הדיון

  1. taxi4u
  2. taxi4u
  3. אורח [DoK לא מחובר]
  4. taxi4u
  5. אורח