אני משתמש בהפצת אחד 2006 של דוביקס ואני מאד מאד מאד מאד מרוצה
בדר"כ הכל עובד חלק
בעבר השתמשתי בגרסת ה2006 הרגילה והיו שם הרבה בעיות
אך גרסת הקלסיק 2006 היא לדידי הגרסה הכי ידידותית וקלה להבנה ולהפעלה
ומאחר ויש לי צורך בשימוש ביותר מעמדה אחת התקנתי במחשב 2 כרטיסי מסך נוספים לכרטיס מסך \
שעל הלוח שגם הוא עם שתי יציאות VGA +DVI
יצרתי לי שלושה יוזרים כל אחד עם סיסמא
ופתחתי את המדריך המפורט של bob smith
Build a Six-headed, Six-user Linux System
להלן סדר הפעולות שנקטתי
1וידאתי קודם כל שאחד 2006 זיהה את שלשת כרטיסי המסך שהתקנתי
ובבדיקה במרכז הבקרה > חומרה אכן מופיעים שם כרטיס המסך שעל הלוח מסוג SIS 651 \
DUAL HEADS
ןשני כרטיסי מסך נוספים מסוג ATI RAGE128
כמו כן התקנתי 3 עכברים ושלושה מקלדות
עכבר ומקלדת ראשיים דרך PS/2
והשאר דרך יציאות USB שונות בעזרת USB TO PS/2 ADAPTER
על מנת למצוא איפה כולם מותקנים הרצתי פקודת lspci | grep VGA
וקבלתי את המיקומים הבאים לגבי כרטיסי המסך :
lspci | grep VGA
00:0e.0 VGA compatible controller: ATI Technologies Inc Rage 128 RK/VR
00:13.0 VGA compatible controller: ATI Technologies Inc Rage 128 RK/VR
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA Display Adapter
לפי מיטב הבנתי כרטיס המסך הראשי שהינו SIS הותקן ב 01:00.0
כרטיס מס 1 ATI RAGE 128 מותקן ב 00:13.0
וכרטיס מס 2 ATI RAGE 128 מותקן ב 00:14.0 אם אני מתרגם נכון את e
שמרתי את הפלט הבא והמשכתי לשלב הבא
שלב העכברים הרצתי פקודה
ls /dev/input/mouse*
/dev/input/mouse0 /dev/input/mouse1 /dev/input/mouse2
למעשה הבנתי שכאן הסדר לא כל כך משנה
אבל בכל זאת שמרתי את הפלט
עכבר ps/2 נמצא בכניסה 0
עכבר usb ראשון בכניסה 1
עכבר usb שני בכניסה 2
המשכתי הלאה למקלדות בהרצת פקודה
more /proc/bus/input/devices
וקיבלתי את הפלט הבא
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
H: Handlers=kbd event0
B: EV=120013
B: KEY=4 2000000 2b803878 f840d001 f2ffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7
I: Bus=0011 Vendor=0002 Product=0005 Version=0000
N: Name="ImPS/2 Logitech Wheel Mouse"
P: Phys=isa0060/serio1/input0
H: Handlers=mouse0 event1 ts0
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103
I: Bus=0003 Vendor=04d9 Product=1400 Version=0142
N: Name="USB HIDBP Keyboard 04d9:1400"
P: Phys=usb-0000:00:03.1-1/input0
H: Handlers=kbd event2
B: EV=120003
B: KEY=7 ff87207a c14057ff febeffdf ffefffff ffffffff fffffffe
B: LED=1f
I: Bus=0003 Vendor=04d9 Product=1400 Version=0142
N: Name="USB HIDBP Keyboard 04d9:1400"
P: Phys=usb-0000:00:03.0-1/input0
H: Handlers=kbd event3
B: EV=120003
B: KEY=7 ff87207a c14057ff febeffdf ffefffff ffffffff fffffffe
B: LED=1f
I: Bus=0003 Vendor=04d9 Product=1400 Version=0142
N: Name="04d9:1400"
P: Phys=usb-0000:00:03.1-1/input1
H: Handlers=kbd mouse1 event4 ts1
B: EV=7
B: KEY=1f0007 0 0 39fa d801d101 1e0000 0 0 0
B: REL=103
I: Bus=0003 Vendor=04d9 Product=1400 Version=0142
N: Name="04d9:1400"
P: Phys=usb-0000:00:03.0-1/input1
H: Handlers=kbd mouse2 event5 ts2
B: EV=7
B: KEY=1f0007 0 0 39fa d801d101 1e0000 0 0 0
B: REL=103
[a1@login ~]$
על מנת ל עשות קצת סדר הכנתי טבלה כזאת
bus seat vga card keboard mouse
11 0 01:00.0 EVENT 0 0
03 1 00:13.0 EVENT 2 1
03 2 00:0e.0 EVENT 3 2
אני מקווה שהבנתי נכון את הפלט
אסביר את עצמי ותקנו אותי אם לא הבנתי נכון
אני הבנתי שיש לערוך את ה xorg.conf לפי הפרמטרים הבאים
עמדה ראשונה מוגדרת על פי הנתונים הבאים
seat or server layout 0 runs on the main SIS CARD at 01:00.0 address along with the keyboard of EVENT 0 & MOUSE 0
עמדה שניה
SEAT OR SERVER LAYOUT 1 runs on one of the twoi ATI VGA CARDS at 00:13.0 address
along with the keyboard of EVENT 2 & MOUSE 1
עמדה שלישית
SEAT OR SERVER LAYOUT 2 runs on the 2nd ATI VGA CARD at 00:0e address
along with the keyboard of EVENT 3 & MOUSE 2
אני מקווה שעד לכאן הבנתי נכון
אני מצרף בנקודה זאת העתק של ה XORG.CONF לפני שאני ניגש לערוך אותו
File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
AllowMouseOpenFail # allows the server to start up even if the mouse does not work
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection
Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,il"
Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "6 7"
EndSection
Section "Monitor"
Identifier "monitor1"
VendorName "Generic"
ModelName "1024x768 @ 60 Hz"
HorizSync 31.5-48.5
VertRefresh 50-70
# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
Section "Monitor"
Identifier "monitor2"
VendorName "Generic"
ModelName "Flat Panel 1024x768"
HorizSync 31.5-55
VertRefresh 40-70
# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
Section "Monitor"
Identifier "monitor3"
VendorName "Generic"
ModelName "1024x768 @ 70 Hz"
HorizSync 31.5-57.0
VertRefresh 50-70
# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
Section "Device"
Identifier "device1"
BoardName "SiS 650"
Driver "sis"
Screen 0
Option "DPMS"
EndSection
Section "Device"
Identifier "device2"
VendorName "ATI"
BoardName "ATI Rage 128"
Driver "ati"
Screen 0
BusID "PCI:0:19:0"
Option "DPMS"
EndSection
Section "Device"
Identifier "device3"
VendorName "Silicon Integrated System"
BoardName "SiS 650"
Driver "sis"
Screen 0
BusID "PCI:1:0:0"
Option "DPMS"
EndSection
Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Virtual 1024 768
EndSubsection
Subsection "Display"
Depth 15
Virtual 1024 768
EndSubsection
Subsection "Display"
Depth 16
Virtual 1024 768
EndSubsection
Subsection "Display"
Depth 24
Virtual 1024 768
EndSubsection
EndSection
Section "Screen"
Identifier "screen2"
Device "device2"
Monitor "monitor2"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Virtual 1024 768
EndSubsection
Subsection "Display"
Depth 15
Virtual 1024 768
EndSubsection
Subsection "Display"
Depth 16
Virtual 1024 768
EndSubsection
Subsection "Display"
Depth 24
Virtual 1024 768
EndSubsection
EndSection
Section "Screen"
Identifier "screen3"
Device "device3"
Monitor "monitor3"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Virtual 1024 768
EndSubsection
Subsection "Display"
Depth 15
Virtual 1024 768
EndSubsection
Subsection "Display"
Depth 16
Virtual 1024 768
EndSubsection
Subsection "Display"
Depth 24
Virtual 1024 768
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1"
# Screen "screen2" RightOf "screen1"
# Screen "screen3" RightOf "screen2"
#Option "Xinerama"
EndSection
אני ניגש עכשיו לערוך את ה xorg.conf
ואצרף אותו כאן לאחר העריכה ואבקש התייחסותכם אם עשיתי את הדברים נכון או לא
דרך אגב אני מקבל כאן איזהשהי הודעת שגיאה
(gedit:4007): Pango-WARNING **: Error loading GPOS table 4097
מייד לאחר שאני מבקש לערוך את ה
xorg.conf
הנה הxorg.conf החחדש אחרי שערכתי אותו אני מאד מקווה שערכתי אותו נכון
לבדיקה אני מריץ פקודת
sort /etc/X11/xorg.conf | uniq
והתוצאה
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
H: Handlers=kbd event0
B: EV=120013
B: KEY=4 2000000 2b803878 f840d001 f2ffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7
I: Bus=0011 Vendor=0002 Product=0005 Version=0000
N: Name="ImPS/2 Logitech Wheel Mouse"
P: Phys=isa0060/serio1/input0
H: Handlers=mouse0 event1 ts0
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103
I: Bus=0003 Vendor=04d9 Product=1400 Version=0142
N: Name="USB HIDBP Keyboard 04d9:1400"
P: Phys=usb-0000:00:03.1-1/input0
H: Handlers=kbd event2
B: EV=120003
B: KEY=7 ff87207a c14057ff febeffdf ffefffff ffffffff fffffffe
B: LED=1f
I: Bus=0003 Vendor=04d9 Product=1400 Version=0142
N: Name="USB HIDBP Keyboard 04d9:1400"
P: Phys=usb-0000:00:03.0-1/input0
H: Handlers=kbd event3
B: EV=120003
B: KEY=7 ff87207a c14057ff febeffdf ffefffff ffffffff fffffffe
B: LED=1f
I: Bus=0003 Vendor=04d9 Product=1400 Version=0142
N: Name="04d9:1400"
P: Phys=usb-0000:00:03.1-1/input1
H: Handlers=kbd mouse1 event4 ts1
B: EV=7
B: KEY=1f0007 0 0 39fa d801d101 1e0000 0 0 0
B: REL=103
I: Bus=0003 Vendor=04d9 Product=1400 Version=0142
N: Name="04d9:1400"
P: Phys=usb-0000:00:03.0-1/input1
H: Handlers=kbd mouse2 event5 ts2
B: EV=7
B: KEY=1f0007 0 0 39fa d801d101 1e0000 0 0 0
B: REL=103
[a1@login ~]$ /etc/X11/
bash: /etc/X11/: is a directory
[a1@login ~]$ /etc/X11
bash: /etc/X11: is a directory
[a1@login ~]$ cd /etc/X11/
[a1@login X11]$ gedit xor
xorg.conf xorg.conf~ xorg.conf.old xorg.conf.one
[a1@login X11]$ gedit xorg.conf
(gedit:4007): Pango-WARNING **: Error loading GPOS table 4097
[a1@login X11]$ cd..
[a1@login etc]$ cd..
[a1@login /]$ sort /etc/X11/xorg.conf | uniq
# **********************************************************************
# 768x576 @ 100 Hz, 61.6 kHz hsync
# 768x576 @ 79 Hz, 50 kHz hsync
AllowMouseOpenFail # allows the server to start up even if the mouse does not work
BoardName "ATI Rage 128"
BoardName "SiS 650"
BusID "PCI:0:0e:0"
BusID "PCI:0:13:0"
BusID "PCI:1:0:0"
# By default, Mandrake 6.0 and later now use a font server independent of
DefaultColorDepth 24
Depth 15
Depth 16
Depth 24
Depth 8
Device "device0"
Device "device1"
Device "device2"
#DontZap # disable <Crtl><Alt><BS> (server abort)
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
Driver "ati"
Driver "evdev"
Driver "mouse"
Driver "sis"
EndSection
EndSubsection
# File generated by XFdrake.
FontPath "unix/:-1"
HorizSync 31.5-48.5
HorizSync 31.5-55
HorizSync 31.5-57.0
Identifier "device0"
Identifier "device1"
Identifier "device2"
Identifier "Keyboard0"
Identifier "Keyboard1"
Identifier "Keyboard2"
Identifier "monitor0"
Identifier "monitor1"
Identifier "monitor2"
Identifier "Mouse0"
Identifier "Mouse1"
Identifier "Mouse2"
Identifier "screen0"
Identifier "screen1"
Identifier "screen2"
Identifier "seat0"
Identifier "seat1"
Identifier "seat2"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Keyboard2" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
InputDevice "Mouse1" "CorePointer"
InputDevice "Mouse2" "CorePointer"
Load "dbe" # Double-Buffering Extension
Load "extmod"
Load "freetype"
Load "glx" # 3D layer
Load "type1"
Load "v4l" # Video for Linux
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
ModelName "1024x768 @ 60 Hz"
ModelName "1024x768 @ 70 Hz"
ModelName "Flat Panel 1024x768"
Monitor "monitor0"
Monitor "monitor1"
Monitor "monitor2"
# Multiple FontPath entries are allowed (they are concatenated together)
Option "Device" "/dev/input/event0"
Option "Device" "/dev/input/event2"
Option "Device" "/dev/input/event3"
Option "Device" "/dev/mouse0"
Option "Device" "/dev/mouse1"
Option "Device" "/dev/mouse2"
Option "DPMS"
Option "Protocol" "ExplorerPS/2"
Option "XkbLayout" "us,il"
Option "XkbModel" "pc105"
Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
Option "ZAxisMapping" "6 7"
# Refer to the XF86Config man page for details about the format of
Screen 0
Screen 0 "screen0" 0 0
Screen 0 "screen1" 0 0
Screen 0 "screen2" 0 0
Screen 1
Screen 2
# seat 0
# seat 1
# seat 2
Section "Device"
Section "Files"
Section "InputDevice"
Section "Module"
Section "Monitor"
Section "Screen"
Section "ServerFlags"
Section "ServerLayout"
Subsection "Display"
# the X server to render fonts.
# this file.
# TV fullscreen mode or DVD fullscreen output.
VendorName "ATI"
VendorName "Generic"
VendorName "Silicon Integrated System"
VertRefresh 40-70
VertRefresh 50-70
Virtual 1024 768
[a1@login /]$
נראה הגיוני ונכון אמנם רק לפי מיטב הבנתי
אני ממשיך הלאה לבדיקה נוספת
sort /etc/X11/xorg.conf | uniq -d
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
H: Handlers=kbd event0
B: EV=120013
B: KEY=4 2000000 2b803878 f840d001 f2ffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7
I: Bus=0011 Vendor=0002 Product=0005 Version=0000
N: Name="ImPS/2 Logitech Wheel Mouse"
P: Phys=isa0060/serio1/input0
H: Handlers=mouse0 event1 ts0
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103
I: Bus=0003 Vendor=04d9 Product=1400 Version=0142
N: Name="USB HIDBP Keyboard 04d9:1400"
P: Phys=usb-0000:00:03.1-1/input0
H: Handlers=kbd event2
B: EV=120003
B: KEY=7 ff87207a c14057ff febeffdf ffefffff ffffffff fffffffe
B: LED=1f
I: Bus=0003 Vendor=04d9 Product=1400 Version=0142
N: Name="USB HIDBP Keyboard 04d9:1400"
P: Phys=usb-0000:00:03.0-1/input0
H: Handlers=kbd event3
B: EV=120003
B: KEY=7 ff87207a c14057ff febeffdf ffefffff ffffffff fffffffe
B: LED=1f
I: Bus=0003 Vendor=04d9 Product=1400 Version=0142
N: Name="04d9:1400"
P: Phys=usb-0000:00:03.1-1/input1
H: Handlers=kbd mouse1 event4 ts1
B: EV=7
B: KEY=1f0007 0 0 39fa d801d101 1e0000 0 0 0
B: REL=103
I: Bus=0003 Vendor=04d9 Product=1400 Version=0142
N: Name="04d9:1400"
P: Phys=usb-0000:00:03.0-1/input1
H: Handlers=kbd mouse2 event5 ts2
B: EV=7
B: KEY=1f0007 0 0 39fa d801d101 1e0000 0 0 0
B: REL=103
[a1@login ~]$ /etc/X11/
bash: /etc/X11/: is a directory
[a1@login ~]$ /etc/X11
bash: /etc/X11: is a directory
[a1@login ~]$ cd /etc/X11/
[a1@login X11]$ gedit xor
xorg.conf xorg.conf~ xorg.conf.old xorg.conf.one
[a1@login X11]$ gedit xorg.conf
(gedit:4007): Pango-WARNING **: Error loading GPOS table 4097
[a1@login X11]$ cd..
[a1@login etc]$ cd..
[a1@login /]$ sort /etc/X11/xorg.conf | uniq
# **********************************************************************
# 768x576 @ 100 Hz, 61.6 kHz hsync
# 768x576 @ 79 Hz, 50 kHz hsync
AllowMouseOpenFail # allows the server to start up even if the mouse does not work
BoardName "ATI Rage 128"
BoardName "SiS 650"
BusID "PCI:0:0e:0"
BusID "PCI:0:13:0"
BusID "PCI:1:0:0"
# By default, Mandrake 6.0 and later now use a font server independent of
DefaultColorDepth 24
Depth 15
Depth 16
Depth 24
Depth 8
Device "device0"
Device "device1"
Device "device2"
#DontZap # disable <Crtl><Alt><BS> (server abort)
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
Driver "ati"
Driver "evdev"
Driver "mouse"
Driver "sis"
EndSection
EndSubsection
# File generated by XFdrake.
FontPath "unix/:-1"
HorizSync 31.5-48.5
HorizSync 31.5-55
HorizSync 31.5-57.0
Identifier "device0"
Identifier "device1"
Identifier "device2"
Identifier "Keyboard0"
Identifier "Keyboard1"
Identifier "Keyboard2"
Identifier "monitor0"
Identifier "monitor1"
Identifier "monitor2"
Identifier "Mouse0"
Identifier "Mouse1"
Identifier "Mouse2"
Identifier "screen0"
Identifier "screen1"
Identifier "screen2"
Identifier "seat0"
Identifier "seat1"
Identifier "seat2"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Keyboard2" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
InputDevice "Mouse1" "CorePointer"
InputDevice "Mouse2" "CorePointer"
Load "dbe" # Double-Buffering Extension
Load "extmod"
Load "freetype"
Load "glx" # 3D layer
Load "type1"
Load "v4l" # Video for Linux
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
ModelName "1024x768 @ 60 Hz"
ModelName "1024x768 @ 70 Hz"
ModelName "Flat Panel 1024x768"
Monitor "monitor0"
Monitor "monitor1"
Monitor "monitor2"
# Multiple FontPath entries are allowed (they are concatenated together)
Option "Device" "/dev/input/event0"
Option "Device" "/dev/input/event2"
Option "Device" "/dev/input/event3"
Option "Device" "/dev/mouse0"
Option "Device" "/dev/mouse1"
Option "Device" "/dev/mouse2"
Option "DPMS"
Option "Protocol" "ExplorerPS/2"
Option "XkbLayout" "us,il"
Option "XkbModel" "pc105"
Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
Option "ZAxisMapping" "6 7"
# Refer to the XF86Config man page for details about the format of
Screen 0
Screen 0 "screen0" 0 0
Screen 0 "screen1" 0 0
Screen 0 "screen2" 0 0
Screen 1
Screen 2
# seat 0
# seat 1
# seat 2
Section "Device"
Section "Files"
Section "InputDevice"
Section "Module"
Section "Monitor"
Section "Screen"
Section "ServerFlags"
Section "ServerLayout"
Subsection "Display"
# the X server to render fonts.
# this file.
# TV fullscreen mode or DVD fullscreen output.
VendorName "ATI"
VendorName "Generic"
VendorName "Silicon Integrated System"
VertRefresh 40-70
VertRefresh 50-70
Virtual 1024 768
[a1@login /]$ 'sort.xorg.conf|uniq -d'
bash: sort.xorg.conf|uniq -d: command not found
[a1@login /]$ sort /
.autofsck boot/ etc/ initrd/ lost+found/ opt/ root/ sys/ usr/
bin/ dev/ home/ lib/ mnt/ proc/ sbin/ tmp/ var/
[a1@login /]$ sort /etc/X11/xor
xorg.conf xorg.conf~ xorg.conf.old xorg.conf.one
[a1@login /]$ sort /etc/X11/xorg.conf | u
ucs2any unicode_start update-menus usb_id_test
udevinfo unicode_stop update-mime-database userdrake
ul uniq uptime userinfo
ulimit unix-lpr.sh urpmf usermount
umask unlink urpmf.real userpasswd
umount unprotoize urpm-generic users
umountloop unset urpmi2smart.py usleep
unalias until urpmi_rpm-find-leaves utmpdump
uname unzip urpmi_rpm-find-leaves.real uuidgen
unexpand unzipsfx urpmq
unflatten update-desktop-database urpmq.real
[a1@login /]$ sort /etc/X11/xorg.conf | un
unalias unexpand unicode_start uniq unlink unset unzip
uname unflatten unicode_stop unix-lpr.sh unprotoize until unzipsfx
[a1@login /]$ sort /etc/X11/xorg.conf | uni
unicode_start unicode_stop uniq unix-lpr.sh
[a1@login /]$ sort /etc/X11/xorg.conf | uniq -d
# **********************************************************************
# 768x576 @ 100 Hz, 61.6 kHz hsync
# 768x576 @ 79 Hz, 50 kHz hsync
BoardName "ATI Rage 128"
DefaultColorDepth 24
Depth 15
Depth 16
Depth 24
Depth 8
Driver "ati"
Driver "evdev"
Driver "mouse"
EndSection
EndSubsection
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
Option "DPMS"
Option "Protocol" "ExplorerPS/2"
Option "XkbLayout" "us,il"
Option "XkbModel" "pc105"
Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
Option "ZAxisMapping" "6 7"
Section "Device"
Section "InputDevice"
Section "Monitor"
Section "Screen"
Section "ServerLayout"
Subsection "Display"
# TV fullscreen mode or DVD fullscreen output.
VendorName "ATI"
VendorName "Generic"
VertRefresh 50-70
Virtual 1024 768
[a1@login /]$
נראה טוב ממשיך הלאה
[servers]
# These are the standard servers. You can add as many you want here
# and they will always be started. Each line must start with a unique
# number and that will be the display number of that server. Usually just
# the 0 server is used.
0=Standard
1=Standard
2=Standard
#1=Standard
# Note the VTAllocation and FirstVT keys on linux and freebsd.
# Don't add any vt<number> arguments if VTAllocation is on, and set FirstVT to
# be the first vt available that your gettys don't grab (gettys are usually
# dumb and grab even a vt that has already been taken). Using 7 will work
# pretty much for all linux distributions. VTAllocation is not currently
# implemented on anything but linux and freebsd. Feel free to send patches.
# X servers will just not get any extra arguments then.
#
# If you want to run an X terminal you could add an X server such as this
#0=Terminal -query serverhostname
# or for a chooser (optionally serverhostname could be localhost)
#0=Terminal -indirect serverhostname
#
# If you wish to run the XDMCP chooser on the local display use the following
# line
#0=Chooser
## Note:
# is your X server not listening to TCP requests? Perhaps you should look
# at the security/DisallowTCP setting!
# Definition of the standard X server.
[server-Standard0]
name=Standard server
command=/usr/X11R6/bin/X -nolisten tcp -novtswitch -sharevts -layout seat0
flexible=true
[server-Standard1]
name=Standard server
command=/usr/X11R6/bin/X -nolisten tcp -novtswitch -sharevts -layout seat1
flexible=true
[server-Standard2]
name=Standard server
command=/usr/X11R6/bin/X -nolisten tcp -novtswitch -sharevts -layout seat2
flexible=true
נקווה לטוב
|